You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Any commit since 2024-03-28 will not boot on my system.
They compile fine but when uploaded to the board it takes the firmware via the bootloader, renames it to firmware.cur and noting else happens.
I have bisected from the most recent commit all the way back to 1759429
This is the last commit that works correctly.
I have raised a PR with the specific changes needed in order to get the board working at #27061
Bug Timeline
2024-03-28
Expected behavior
The compiled firmware to boot and work on the board.
Actual behavior
Firmware compiles, but does not boot.
Steps to Reproduce
Apply changes from the PR mentioned in the comments.
Set the board to #define MOTHERBOARD BOARD_BTT_SKR_V3_0_EZ
Compile the STM32H723VG version
Upload to the board
Version of Marlin Firmware
bugfix-2.1.x
Printer model
Creality Ender 3 V2 Neo
Electronics
SKR 3 EZ
LCD/Controller
DACAI
Other add-ons
No response
Bed Leveling
UBL Bilinear mesh
Your Slicer
None
Host Software
OctoPrint
Don't forget to include
A ZIP file containing your Configuration.h and Configuration_adv.h.
Did you test the latest
bugfix-2.1.x
code?Yes, and the problem still exists.
Bug Description
Any commit since 2024-03-28 will not boot on my system.
They compile fine but when uploaded to the board it takes the firmware via the bootloader, renames it to
firmware.cur
and noting else happens.I have bisected from the most recent commit all the way back to 1759429
This is the last commit that works correctly.
I have raised a PR with the specific changes needed in order to get the board working at #27061
Bug Timeline
2024-03-28
Expected behavior
The compiled firmware to boot and work on the board.
Actual behavior
Firmware compiles, but does not boot.
Steps to Reproduce
Apply changes from the PR mentioned in the comments.
Set the board to
#define MOTHERBOARD BOARD_BTT_SKR_V3_0_EZ
Compile the
STM32H723VG
versionUpload to the board
Version of Marlin Firmware
bugfix-2.1.x
Printer model
Creality Ender 3 V2 Neo
Electronics
SKR 3 EZ
LCD/Controller
DACAI
Other add-ons
No response
Bed Leveling
UBL Bilinear mesh
Your Slicer
None
Host Software
OctoPrint
Don't forget to include
Configuration.h
andConfiguration_adv.h
.Additional information & file uploads
Marlin-Configs.zip
The text was updated successfully, but these errors were encountered: